|
Timber And Wood In Timber
List of timber Wood merchants
12345
To steam bend or laminate timber and what timber is best for the processes?
i would like to build the second picture of the lounge from the top of this site trendir.com outdoors elegant outdoor lounge chairs flexible wood chairs by pooz.htmli have researched both steam bending and laminating and still cannot make a decision.Also, i havnt decided on which Australian hardwood timber to use, as i am not sure which is pest for the processes.Please let me know what you think
Will I need planning permission for a 5.4m tall timber post (+0.3m) little pole attatched to it?It's for an?
anemometer. Thanks.
Why would you suggest Timber over steel, or steel over timber for a pergola.?
i wanted to know what is best for making a pergola or an outdoor student shelter in a school. i need it for a school research task, and primary source's would help my research. thanks
What is moisture control in timber?
How thick does timber need to be to lower a ceiling?
I'm lowering my sisters bathroom ceiling to install insulation but am not sure if the wood my sister bought will be strong enough. I was told by a carpenter to buy 2 pieces of 2 x 1 inches 25mm x 50mm and drill these lengthways into the wall to support pieces of 2 x 4 inches going widthways and then drill plasterboard into these. However the closest the shop had was 3 4 x 1 3 4 or 20mm x 44mm will this be strong enough.The room is 1.5m x 2.4m and I'm going to space the 2 x 4's 600mm apart. The pieces on each end will also be drilled into the wall removing some of the weight.Also how long should the screws be?Thanks
Would 5mm hardwood timber boarding be suitable for a flooring?
The boards would be nailed to joists 2ft apart. Would 5mm be thick enough?
What is done with timber slash?
Timber slash
How to spray paint a timber fence?
What is the best method to paint a timber panel fence, using a spray gun? ie. how far away should I be spraying, and should I use a sweeping method or something different?
What is the problem if not reuse timber formwork after construction?
the increasing amount of construction and demolition C& D waste being dumped at landfill sites. Greater consideration must be given to waste generation and management at the planning stage of a building development to reduce wastage levels.
I need to pullout some timber from a planter. any ideas on how to get it out without tearing up the planter?
i'm doing some landscaping for my uncle, and the previous owner of the house had put timber around two birds of paradise. i'm guessing they did it to terrace the planter. the problem it that the birds of paradise were pushing the brick out on the planter wall. so i've dug them out but now i need to get the wood out. i don't want to tear up the planter getting it out and i'd like to not leave big parts behind.any suggestions?
Spraypainting two pack on timber,wood and such as.?
I am an automotive spraypainter, but want to know when spraying a wooden door and other industerial stuff with two pack, is it the same as spraying metal or fibreglass? I mean do u use the same spray gun, which is used in automotive spraying? the same technique and just different paint for woods, or the spray gun and the technique is different? i know the spray gun used for spraying walls is different but the paint and pressure required for it is different too, but i am just curious since its two pack paint maybe the same spray gun is used? please give as much information as you can.
Why don't we build with glass, steel, timber and stone?
except the fact that glass with smash
What type paint do i use to paint timber furniture so it has a gloss finish?
I have sanded a wall unit and want to paint it white but with a gloss finish and i want to put either silver or a pewter colour knobs on the drawers. What kind of paint do i get? Someone mentioned getting an oil based one so i get the finish i want
Cheap but good quality timber to use when building a dining table?
does anybody know what type of timber would be suitable to use to build a dining table, but is not very expensive but still has good quality?
|
